GDA Series busbar is intended for power distribution and transport in industrial, commercial and tertiary buildings.
Busbar trunking system with aluminum or copper conductors with monoblocjk joint and protective casing made of aluminum. The outer casing shall perform the function of the PE conductor and ensure electrical continuity throughout the duct.
Flexible solution
3P + N system with neutral section equal to that of phase and protective conductor made from the foil section with always greater than the phase.
Degree of protection IP50 can be increased up to IP55 (certificate).
The system is suitable for installation on ceiling, wall, riser without derating.
Features
- Rating: 63-2500 A
- Conductors: Aluminium (GDA); Copper (GDR)
- Housing: 100% aluminium
- Configurations: 4P+PE; 5P+PE (always neutral 100%)
- Comply with: CEI EN 60439 1-2; IEC 439 1-2; CEI EN 60529; IEC 529
- Item Length: 4 m and any customized length
- Distance between points derivation: 1 m / 0.5 m
- Junction boxes: from 32 to 1250 A (lightweight, robust and design)
- Protection class: till IP55
- Live parts not accessible
- Advantages: corrosion resistant; one bolt joint; fast and easy assembly; high thermal dissipation; low weight; ; reusable and recyclable
K SERIES Power busbar 1250-5000 A
K Series busbar is intended for high power distribution and transport in industrial, commercial and tertiary buildings. 4 aluminium conductors with identical cross-sections (3P + N + PE). The conductors are isolated using a double polyester film pre-shaped, self-extinguishing V-0 halogen free TM, thermal class B conform to the glow-wire test according to IEC 60695-2-10.
Flexible solution
Among the conductors are positioned four sheets of polyester that ensure the operation with an isolation voltage equal to 1.000V. Standard busbar trunking is IP40 and can go up to IP55.
Features
- Rating: 1250-5000 A
- Conductors: Aluminum
- Housing: aluminum anodized matt black
- Degree of protection: IP40; IP55
- Configuration: 3P + N (100%) + PE (> 100%)
- Complies with: IEC 60439 1-2, IEC 439 1-2, EN 60529, IEC 529
- Advantages: Compact, sandwich type, high reliability monobloc junction, standard Elements of 4 m, high heat dissipation, light weight, class F insulation halogen free, PE cross section always higher than the Phase
ISOLSBARRA Power busbar 630-6300 A
ISOLBARRA is a power busbar with fully insulated conductors of Aluminium or copper. This busbar can be used in indoor and outdoor installation.
Advantages
- Compact dimensions
- Low impedance system
- Tap off access opening
Features
- Ratings : 630-6300 A
- Protection degree : IP40; IP42; IP66; IP68
- Configurations: 3P+PE; 4P+PE; 5P+PE; N=50%-100%-200%
ISOLFLEX Flexible terminals 800-6300 A
Flexible connections are the optimal solution for L.V. electrically connecting busbars and transformers, panels, alternators and drives. The use of flexible terminals attenuates the transmission of vibrations between the two parts, ensuring stability and duration of the assembly in time.
Easy to adjust
The specifically designed shape of the flexible terminal allows to adjust positions (up to 30 mm) without removing the previously installed parts.
Features
- Rating: 630-6300 A
- Conductors: Aluminium or Copper (option tinned or silvered)
- Configurations: 2P; 3P; 4P; 5P; N=50%-100%-200%; PE=50%-100%-200%
- Complies with: CEI EN 60439 1-2; IEC 439 1-2; CEI EN 60529; IEC 529
- Advantages: high flexibility and light weight; multiple customizations
Main applications
- Industrial factories
- Sport halls
- Workshops
- Greenhouses
- Hypermarkets
- Office buildings
- Universities
- Naval
- Senior housing
- Garages
- Data centers
- Shopping centers
- Department stores
- Tertiary
- Hospitals
- Stadiums
- Conference centers